The D-Link DIR 822 dual band is a wireless latest technology 802.11AC networks router. It provides high-speed network speed in all homes. The network coverage of this router is exceptional. The four high-gain antennas are placed in a wireless router that accurately expands the wireless network signals.
Nowadays, every home requires a stable & powerful network device. Because all the devices in the house are compatible with all WiFi networks. Then, Dlink DIR 822 dual band wireless router is a perfect network device for your home.
It delivers fast, strong, & reliable wireless network speed in the whole home. The Wi-Fi & Ethernet connectivity technology is enhanced in this router. The 802.11/n/b/a/g wireless standard is more compatible with this router. Every client device easily connects to this networking router.
The dir-822 wireless networking router provides ultra-fast network signals. You can easily connect more than 20 devices to this networking router. After connecting 20 devices, the network signal is stable. If you wish to verify the firmware version, then you need to log in to the account. Then, with dlinkrouter local, you can easily log in to the account. Afterward, you can easily quickly verify the firmware version.
Table of Content
Why is the Router’s LED Blinking Repeatedly of D-link DIR 822 Dual Band wireless router?
The LEDs light is placed on the front panel of the dir-822 wireless router. With this light, you can easily verify the status of the router. However, sometimes, this LED light blinks repeatedly and the network signals are instantly slow. Your gaming & streaming disconnect and not take online experience. There can be many reasons for the blinking of the LED light repeatedly.
- Firmware issue
- Connection not properly
- Internet modem is not connect
- Incorrect repeater position
- The power cable is faulty
Superb Ways To Fix LED Blinking Repeatedly
If the LEDs light blinking repeatedly on the D-link dual band wireless router then you should verify the issue. Because you can solve such issues manually. You can follow the given below in a superb way and then manually quickly resolve the issue.
Reset the router
If the LEDs light blinking repeatedly then you should check the issue. If you wish to manually resolve the issue then you perform the reset. The reset button is placed on the back panel of this router. However, this button is very small, so you cannot press this button with your finger.
If you want to press this button to fix the issue then you can use a small pin. Press this button well with a small pin. To reset the router, you must use a small pin and press that pin on the reset button. Then the LED light will blink 3 times which means that your router has been reset. After that, the issue will solve.
Connect the broadband internet modem
If the Internet modem does not connect well to your wireless router, the LED light will blink repeatedly. To properly resolve the issue you can connect the modem to the router in a proper manner. For this, you can place the internet modem near the dir-822 wireless router. Then, you will find out the Gigabit Ethernet port.
On the back panel of the wireless router, you will find out the LAN port. Then, you can use an Ethernet cable and accurately apply this cable to the available LAN port. Now, turn ON the device and verify whether the internet modem connect or not. If the modem connects then the LED light problem-solving.
Restart the DIR 822 dual band
If the LEDs light of the wireless router blinking repeatedly then you can restart the device to properly fix this issue. To restart the device you should verify if the cable connect or not. If the cable connects to the router then you instantly disconnect it.
Then, press the power that is located on the back panel of the router. You can press this button for 10-15 seconds. Then, your wireless printer power off. After some minutes, you can again power ON the router. After that, the LED blinking issue fix.
Update the d-link router firmware
If the LED light is blinking repeatedly then you should verify the dir 822-firmware version. Because if the version is old then the LED repeatedly blinks. To properly verify the firmware, you can use the router’s IP address and this IP address is input in the web utility. After that, properly log in to the account by inputting the username and password.
On the web management page, you can select the firmware upgrade option. In the firmware upgrade option, if the firmware version is old, then you should update it. However, for this, a new & latest firmware file is needed. You can install this file by visiting our website. Now, you can easily upgrade the firmware of the WiFi router.
Verify the cable connection
If the LED status changes repeatedly then you should verify the cable connection. Because sometimes the cable connection is incorrect then the LEDs light blinking. If the cable connection is wrong then you can correct it. For this, you take a proper cable and then apply it to the port. Then, the cable connection is ready to fix the LED status.
