In today’s time, there is a wireless printer in every house because copy paper of documents is needed in every field. Therefore, internet connectivity is required for these wireless printers to work properly. Without network connectivity, this latest technology USB Printer Not Working.
Therefore, for such a printer, you need to find such a network device that gives fast and stable network signals. In addition, along with this, the network device should have USB ports so that the USB printer can be connected easily.
Then, the Netgear WiFi router is a perfect device because it provides high-speed network signals. Moreover, on the back panel of this router, the USB port place. Then, your wireless all-in-one printer easily connects to the network device.
Additionally, the MU-MIMO technology enhances this router, so more devices easily communicate with the router along with the USB Printer Not Working. You can easily take the online experience with the network signals of this wireless router.
If you wish to enhance the network signals of this router then your device is more connected. Then you can use http://192.168.1.1 and then properly configure the wireless & advanced setting. After that, the network signals maintain. Some causes:
Table of Content
USB Printer Not Working with Netgear WiFi Router
The USB printer easily gets network connectivity with the Netgear wireless router. Through the USB port, you can easily connect the wireless printer to the network router. However, sometimes, the USB printer is not working with the network router. Then, there are some reasons, which are as follows:
- Not using the correct password
- USB cable is faulty
- Dust particles accumulated on the USB port
- Wireless router firmware issue
- LEDs light blinking orange & red
Troubleshooting steps to fix the issue
If the USB printer is not working with the WiFi router then you should verify the issue. If the issue is very common then you will try to solve this issue manually. To manually solve the issue, in the given below there are some troubleshooting steps.
Check the basic setting
If the USB printer is not working with the wireless networking router then you should verify the basic setting. You ensure the power of the printer is ON and the LEDs solid. Open the printer setting in your computer device and verify the printer’s basic setting. If the WiFi option is disabled then you should enable it properly.
Many times, the basic setting configure wrong then the printer is not working to the network router. To resolve the issue properly, you should configure the basic setting of the all-in-one printer.
In the basic setting, you ensure your printer connects to the right WiFi network. If the printer does not connect to the right network, then quickly disconnect it and try to connect the right network.
Move the printer closer to the wireless router
If the USB Printer Not working or connected to the network signals then you should check the position. Because sometimes, the position is incorrect on both devices. If your printer is far away from a network device, it will not work with network devices.
Therefore, to fix this issue, you should maintain their position. You can place the wireless USB printer closer to the Netgear nighthawk router. By placing it nearby, it will easily connect and you will work with the printer. Then, to properly fix the issue you can mode the printer position.
Reboot or unplug the printer & Netgear WiFi router
If you wish to resolve the issue then the ideal solution is you can reboot your printer & router. If the USB Printer Not Working with the network device then you can reboot the device. After that, the issue will fix. To reboot the printer & networking router, you can unplug all the wires from the USB port of the printer & router.
Then, you can smoothly press the power button of the printer & router. Now, your printer & router are powered off. After some minutes, you can give the power to the printer & router and turn ON the device. After that, the not working issue will solve.
Update the driver when USB Printer Not Working
If the driver & firmware of the Netgear WiFi router is not updated then it is not working and the user faces various issues. If the USB Printer Not Working with the network device. Then firstly, you need to verify the printer driver as well as router firmware. If the firmware is available on your router then you should update it.
To update the printer driver, you can visit our website. Then you find out the printer driver option, you can click this option. If the driver update is available then you should update it. To update the dual-band router firmware, you use the router IP address and then instantly update the firmware in the latest version.
USB cable resolve the USB Printer Not Working
Sometimes the USB cable is faulty & not working, the USB Printer not working with the dual-band networking router. If you wish to manually resolve the issue, then you need to check the USB cable.
If that cable breaks in the middle of damage, then you have to remove it from the printer and the router. To solve the issue, you should plug the working USB cable into the router & wireless printer.
