Tplink mobile router: In today’s time, everyone uses a mobile phone and enjoys his life. But whatever apps are there in the latest technology mobile, they work only with simple internet connectivity. If there is no internet connectivity then these apps are useless and neither can you enjoy your life. You can also stream videos, do online gaming, web surfing, and video conferencing on your mobile phone.
If you want to use your mobile properly and want to enjoy all the apps on your mobile phone, then you can install a power network device for your mobile phone. If you find out the network device for the mobile device then you install Tplink mobile router that is specially designed for the mobile phone.
Additionally, this router is very small and is easy to carry in your pocket. That’s why some people also call this router a pocket router. The network connectivity is faster and 10 mobile devices easily access the internet connectivity without any hassle.
If you wish to configure the setting to amplify the network range then you can easily configure it by using http://tplinkmifi.net. This is the official web address of this MiFi router, you can easily configure all settings by using this address.
Table of Content
Why is the WiFi LED not blinking on the Tplink Mobile Router?
The tp-link mobile wireless networking router provides high-speed network signals. The WiFi LED light is built-in on the front panel of this router. You can easily know the status of the internet through this LED light.
If this LED keeps blinking then it means that the internet status is working. If the LED light doesn’t blink then it means there is some issue you have to verify the issue. There could be some other reasons due to which the LED light does not blink.
- SIM card is not installed
- Not connect to the internet
- Not turn ON the WIFi router
- Many devices connect
- Not install 4G SIM card
Unique steps to fix WiFi LED Not Blinking On Router
If the WiFi LED light is not blinking in your Tplink mobile router then you should verify the issue. Because many issues are very common that you can solve manually. If you wish to solve this issue manually, then you can follow some steps.
Install 4G LTE SIM card
If the WiFi LED light is not blinking then you should verify the SIM card. Because many times you are not installing the SIM card inside your Tplink mobile router. Because of which the WiFi LED does not blink.
If you want to fix the issue then you have to install the SIM card of the router. Many times the SIM card is installed in the mobile router but the WiFi LED is not blinking. If the LED is not blinking after installing the SIM card then you should verify the SIM card is 4G.
If you install a 3G or 2G SIM card then your router is not working & the LED light is not blinking. Then, you should know the mobile SIM card is 4G or 3G. If the SIM card is 4G then you can remove this SIM card in the SIM card slow of the router. After that, install the 4G SIM card in their slot. Now, the WiFi LED light is blinking properly.
Restart the mobile 4G LTE router
If the WiFi LEDs light is not blinking off the mobile router then you should verify the issues. To properly resolve the issue, you can restart the device. If you have to restart the device, first check that there is no cable connect to the router. If any cable connects or your wiring is connected then first of all you have to disconnect that cable.
After disconnecting the cable, you will see a power button on the front panel of the Tplink mobile router. You can press this button and properly power off the device. After powering off the device, you can wait for 8-10 minutes. After that, you can change the router and power ON the router. Then the issue will be solved.
Disconnect extra device
If many mobile devices connect to the mTplink mobile router then the WiFi LED is not blinking. Because the mobile router cannot provide a WiFi network to more than 10 mobile devices. If you have connected more than 10 mobile phones then you must disconnect them. If you want to disconnect the extra device from this router, then you can easily do it by changing the password.
To change the password, you can use http://tplinkmifi.net to change the password. By using this you can easily change the password. After changing the password, all the devices are disconnected and WiFi LEDs light blinking.
Verify & upgrade the router firmware
If the Tplink mobile router firmware version is old then the WiFi LED light is not blinking. To resolve the issue properly, you can upgrade the firmware to the latest version. You can use the mobile router’s IP address and then log in to the account by inserting the admin password.
After that, visit the advanced setting and select the firmware upgrade option. Under the firmware page, you can upload the latest firmware file in their field. After that, you can easily upgrade the firmware to the latest version.
