If you have small to medium-sized products to take a photo online or for Amazon on your website, there is no need to rent an expensive studio. You can always take pictures and save a lot of money by setting up a small DIY photo studio. You will be surprised by how long the DIY study will take. So let us get started!
Whom do you have a DIY Photo Studio for?
Creating a self-built photo studio is a great option for anyone who wants to add their small to medium-sized products to their online store but does not have the money to rent a professional studio.
The DIY photo studio is easy to install and requires minimal investment. If you want to take product photos with the model, I recommend that you should observe a professional studio for a room to get a perfect idea. The studio has all the lighting, theatrical equipment, and experience to contextualize your products.
If you have small to medium-sized products and want to walk a mile to figure out the light and angles, a DIY studio is a great choice.
Most cell phones today have more than capable cameras. This means that a good DSLR or compact object will make it truly special and worth the investment.
Each DSLR camera allows you to change lenses, adjust the exposure manually and adjust aperture, which improves the overall quality of your images and allows for greater creative flexibility.
Whether you are using a dedicated camera or a smartphone, tripods are needed to get consistent, consistent shots from the same angles.
Where can I make my camera?
Good lighting is essential for good product photography. So try to choose a site with lots of soft natural light and out of direct sunlight. If natural light is not enough, we recommend a soft sideline.
Curtain kits are inexpensive and help create the perfect lighting. The wonder spotlight also works when filling dark rooms and is convenient or inexpensive.
The rest of your layout is the background, which can be a blank sheet or a white roll of paper, which you can also buy for a relatively low price. Your room should have a neutral background with lots of soft light.
What would it take?
- Step 1
Place the table next to the window (main indicator), remembering that the target is lit evenly and evenly. If you do not have a window with daylight, the rain lights hang next to the camera.
- Step 2
Place the wallpaper on a wall or in a place where the wallpaper can still stand. Make sure the wallpaper is arched against the wall so that the wallpaper looks like forever.
Try straightening it, but do not worry about corrosion if you are using foil or paper as it can be done during post-processing as well.
Use staples or masking tape to keep the paper or sheet of paper as stable as possible so that nothing moves by mistake.
- Step 3
Place a reflector (fill light) on the other side of the window or a rain light (key light) and place the product in the center. A spotlight or solid light is used to remove unwanted harsh shadows and can display some product details.
If you are using a spotlight, make sure it is large enough to illuminate the entire content.
- Step 4
Mark the sheet or paper showing where the products need to be to maintain consistency. Adjust the camera and tripod to the desired angle, take photos and play from different angles.
Remember, the angles of this technique (and the next) need to be consistent to create consistency on your website. It usually looks more professional, so it is important to invest enough time to personalize it.
What about post-production?
Post-processing is essential for keeping your photos integrated and professional. In post-processing, you can paint your products as close as possible to the color you want or paint existing products without taking additional product photos.
The possibilities are endless. However, it is important to understand what can be achieved in post-production to know what to do while filming.
Sub-processing can also be outsourced if you do not have the ability or need to edit a large number of images. We work with over 4,000 stores
Learning basic studio lighting for your DIY home studio
Your lighting is the most important part of your photo studio layout and it is safe to say that the best camera in bad lighting conditions will have the worst weather than your regular camera in great lighting.
In this section, we will look at the language of lighting to give you a better understanding of studio lighting and to help you understand basic lighting.
1. Studio lighting
Studio lamps are relatively broad concepts and cover all lamps used in the photo studio. There are many branches of studio lighting and below we will discuss the basic information about studio lighting. Unlike regular home lighting, studio lighting allows you to adjust the brightness and better control the lighting.
There are three main types of studio lamps. A fluorescent lamp, LED, and tungsten.
Fluorescent lamps: These lamps are energy efficient but offer relatively low light intensity, typically around 60-100 watts. The light sources are easily accessible, economical, and interchangeable.
LED: LED lights are very energy efficient and produce little heat. That is many light-emitting diodes (LEDs) and they usually last a very long time.
Tungsten: Tungsten (or “halogen tungsten”) – light provides the highest level of product, but also generates a lot of heat. Bulbs are relatively cheap to replace, but they can change the color temperature by adjusting the brightness.
What is permanent light/permanent light?
As the name suggests, the lighting remains permanent or permanent when switched on. You can adjust the light by including a frame. It all depends on having everything right on your camera
What is a flashlight?
A strobe light is a flash that triggers every time a photo take. This makes it somewhat difficult to determine the initial result, which will require several experiments to achieve the desired effect. Strobes are generally much taller and brighter and need to charge before the next shot.
The choice between continuous light and flashlight is only a personal decision. Continuous lighting gives you more control and consistency, but flash gives you a little more impact.
2. Central lighting
The main indicator is the reflector, which usually has the maximum intensity. The use of window as the main luminaire, but the window can produce different results depending on the day and the weather.
Therefore, it recommends using artificial light with a diffuser to illuminate the material when natural light is insufficient or inaccessible. The main light helps shape your design and place anywhere depending on the desired effect.
3. Fill with light
Solid lights usually place on the other side of the key lamp to fill in the shadow created by the key lamp. Full light should be harmless (soft) and without creating a shadow of its own; helps to create smooth and even tones in images. Solid light does not have to be light. It can be something that can fill in dark spaces, like a spotlight or a blank wall.
You can freely make a DIY reflector or use a white shoe. Anything that reflects soft light would work. In addition, the reflector does not take up much space but remember that the reflector should always be larger than the object.
Soft candles are also popular full candles because they are relatively inexpensive and provide good shade. (More on this below)
Strobe lights (like strobe lights) are an option, but they do require disinfection and cost a little more. You can control the flow of light with photo studio lights. You can adjust and dim the light and use various modifiers to create the perfect lighting situation.
Diffusion is the gradation of a light source through a filter to make images appear smoother and uniform. Applying a diffuser to a light source removes heavy shadows and helps highlight certain areas instead of casting shadows.
Light sources disinfect in several ways. One of them is to use diffuse panels of various sizes at your local camera shop. They work fine, but to cost a lot of money, special brackets and brackets.