If you want to increase the network signals of your wireless router and keep your device connected you can use a TRENDnet AC1200 WiFi extender. Because this extender device is more compatible with all standard routers, access points, broadband modems, & other private networks.
In many places, the range of the wireless routers is not stable, due to which you are not able to enjoy the full network connectivity. If you connect more than 10 devices with a wireless router, then you get to see a buffering signal in your device. So the user gets very upset with these signals and is not able to enjoy the network connectivity.
Moreover, the wireless network signals are more reliable & boost. The beamforming technology is equipped in this router that accurately increases the wireless network signals.
The external antennas are built-in on the top panel of the range extender device that boosts the network signals. The 867Mbps is enhanced in the 5GHz network & 300Mbps is equipped in the 2.4GHz network.
The extreme speed of trendnet tew-822dre is buffer-free for the 4K/3D/HD video streaming. The two modes are built-in in this device, the two-mode is the extender & access point mode. This mode is usually more useful to properly increase the network signals.
Why Are System Settings Necessary Of TRENDnet AC1200 WiFi Extender?
If you wish to increase the network signals of your range extender device then you should verify the system setting. Because the system setting is most important to accurately boost the network.
If you wish to amplify the network range of the ac1200 range extender device then you should configure the system setting. Under the system setting, you can have many settings which are as follows.
- Network setting
- Time setting
- Wireless access point mode
- IPv6 access point mode
- Wireless range extender mode
Configure System Settings of TRENDnet AC1200 WiFi Extender
If you wish to configure the Trendnet AC1200 WiFi Extender system settings. Then you can easily configure it. If you want to configure system settings easily, then for that you can follow the below steps and you can configure easily.
TRENDnet AC1200 WiFi Extender Time setting configure
Under the system setting of the Trendnet AC1200 WiFi Extender device, you should configure the time setting. The time setting allows you to set up the schedule control and record the event logs correctly.
If you wish to configure the time set accurately, then, you can open the web utility on your device. In the search bar of the browser, you can smoothly input the IP address.
Then, insert the admin password in their field and properly log in to the account. Now, you can visit the homepage of the extender and select the time-setting option in the following setting. Under the time-setting option, you can configure the current time.
You can enable the NTP server. Also, enable the daylight saving option. On the bottom side, the Date & Time option is there, you can easily configure the time with this option.
Wireless access point mode
The access point mode setting is necessary to access the internet from the extender. If you enable the access point mode feature then many devices easily access internet connectivity. You can visit the extender website. After that, properly log in to the account by using a login password.
Then, you can visit the Trendnet AC1200 WiFi Extender setting and select the wireless option. Under the wireless, you can choose the basic option. In this option, you can always tick an option to enable wireless.
Select the optimum wireless channel. You can enter the network name in their field. Also, configure the 5GHz network in their setting. After configuring all the settings, you can click the save option and accurately save the access point mode setting.
IPv6 access point mode
If you wish to configure the internet protocol version 6(IPv6) then you can easily configure it. For this, you can launch the web utility and insert our official website. You can log in to the account by using the default login username & password. Then, visit the setting and choose the wireless option.
Under the wireless setting, you can click the IPv6 option. The IPv6 address accurately shows the static or dynamic IPv6 address. You can enter none in the primary DNS address. Also, enter none in the secondary DNS address. After configuring the IPv6 address you can save this setting by clicking the done option.
Configure main network setting
The network setting is most important for the Trendnet AC1200 WiFi Extender device. If you wish to configure the network setting then you can log in to the account by using the IP address, Username, & Password of the extender device.
Then, visit the main wizard of the extender. In this wizard, the trendnet setup wizard is open and you can click the OK option. Then, configure the network setting. In this setting, configure the IP address, subnet mask, primary DN server, and more. After configuring the network setting you can click the save option and accurately save the setting.
Wireless range extender mode
To extend the wireless network signals you can configure the Trendnet AC1200 WiFi Extender setting. In the setting of the extender, you can easily configure the extender setting. Under this setting, configure the extender mode properly. After configuring this setting, you can click the save option and accurately save the setting.