Front load washing machines have been around for a long time and have been the top choice of front load washers for years now. They owe their reputation to their reliable ergonomics, gentle cleaning methods, and water and energy efficiency.
Although these models entail high efficiency, their parts are expensive. People shy away from buying front-load machines because they are costly to purchase and maintain. Moreover, with the Australian washing machine market growing with a steady CAGR of 7.2%, the functionality offered by these machines is only going to see an upward trend.
So, how do you maintain front load washers? What must be done to ensure that you don’t spend too much getting them fixed? Read on to find out!
Table of Content
Top tips for maintaining your front load washer
Taking care of your front load washing machine is not a tedious task. However, you must constantly pay attention to some minute things. They are as follows:
1) Make sure you use a detergent made specifically for high-efficiency machines.
Front load washers don’t demand much detergent to wash your clothes properly. To avoid a film formation over the drum, you need to find the appropriate high-efficiency machine detergent in the minimum recommended amount.
This is because using too much detergent or the wrong type of detergent will naturally generate more suds, making your machine ground zero for mold formation. Mold formation is detrimental to your washer since it can cause significant mechanical or electrical damage.
2) Unload as soon as it is washed.
Once your clothes have been washed, make sure you get them out of the washer as soon as possible. Leaving wet clothes in the front load washer for extended periods can pave the way for mildew’s perfect damp growing grounds.
Also, it would be best if you made sure that no pets or kids climbed into the washer.
3) Leave the front load washer door open.
Once you are done using the machine, it is advisable to leave the washer door open. This improves air circulation, further reducing the chances of mold and mildew growth inside.
Important:- How To Get Power Washer Black Friday Deals?
This cannot be stressed enough, but mold or mildew growth in your machine will burn a deep hole in your pockets. Do your best to ensure that you won’t have to deal with this issue.
4) Remove the dispenser drawer when the washer isn’t in use.
Similar to keeping your washer door, you need to keep your dispenser drawer open as well. Air circulation will cut down the chances of the dispenser being wet. As a result, mold or mildew formation is no longer a possibility.
5) Make sure the washer door seal is clean.
Maintaining the quality of your washer door seal is also vital, or the washer won’t close properly. To extend its lifetime, you need to keep this seal clean and free of impurities.
Use a water and vinegar solution to get rid of sludge and other existing impurities. You can also use Q-tips to clean areas considered hard to reach.
Wrapping up:
Front load washers have always had the reputation of being difficult and expensive to maintain. People are generally not ready to compromise on the reliability of a top-load. But this does not mean that front-loads are not reliable.
If properly managed, front load washing machines can provide a significantly better washing experience than top loads. All you need to do is make sure that your machine isn’t victim to mold or mildew growth, and you are good to go!