If your house is in a big area and ever you are frustrated by dead zones. Not needing to be worried by using a devolo wireless range extender can easily extend the range of your home wireless network. The traditional router provides a high-speed connection, but it is not capable of wide-range coverage. It has many advanced features that support dual-band frequency as well as MU-MIMO technology that makes it more compatible with spreading the network in tough areas.
As well as if you are searching for the best extender, then the devolo is the right choice. It kills the dead zones by repeating the signal more widely and providing a high speed.
Devolo Wireless Range Extender
The devolo extender performs very well. It will transmit the signal. The devolo extender just needs 10% of the signal to boost the network range. You can easily complete the devolo wifi booster configuration just by using the default IP Address. It will take you to the administration login page.
As well as the devolo booster comes along with built-in Omni antennas that help to boost the signal in a large area by transferring through walls. If your house is big and not getting the proper range of your wireless router in your room. Can use the repeater to extend the network zone.
Ways to fix devolo wireless range extender not connecting issue
If the devlo repeater is not working or you are facing any kind of issue. As well as, you just need to check the power button is “ON” or not. The devolo repeater provides you a high speed and wide range coverage by eliminating the weak spots as well as this repeater is an advance and multi-function repeater. That supports all kinds of wireless devices. You can easily connect your traditional router with the devolo wireless range extender and can enjoy a wide range in your whole house.
Change your repeater position.
To use the wide-area network, you can use a devolo wireless repeater. In case, If it’s not working or you are getting any kind of issues. Then you must check the connection status. Be sure that your wireless repeater is in the range of your devolo wireless booster. Sometimes poor internet range may cause the not connecting issue if your device is not connected wirelessly.
You can establish a wired connection by using an ethernet cable. Just need to connect one end with the ethernet port of your router and another end with the port of your repeater.
Restart your repeater
- You can fix the issue by performing a restart.
- You just need to disconnect all the connected wires of your repeater.
- Then, Wait for 10-15 minutes.
- Now, properly insert the wires and power it “ON” the restart process can fix the issue.
- Check the status of LED indicators.
As well as if no changes have been noticed, That means your repeater is physically damaged. It would be best if you replaced your repeater. Check the internet connectivity of your router. Connect the DSL line properly with the router.
Remove network obstacles
If your wireless router is connected with the devolo wireless range extender wirelessly. Then you must be sure that there is not any kind of network obstacle, things like Coins, Pin, and Cellphone. Please remove it. These things will interrupt the network connection and make your network slower.
Place your repeater in the range of your wireless router. A weak connection can also create this kind of issue. You can use a wired connection by using an ethernet cable.
Perform a factory reset
If by following all the given steps, your problem is not solved. Then there is only one option left that one is reset. You need to reset your devolo extender to fix the problem of resetting your device permanently. Power “ON” your device by plugging its power adapter into the electrical outlet. Then find the reset button and press it for 10 seconds using a paper clip. Your repeater will automatically enter reset mode and restart after completing the process.
We recommend you take a screenshot of your all to save settings because after doing the reset process. Your device’s settings will be set as default, and you will need to configure your repeater once again.